Door will not open or feels very heavy
A snapped or worn spring stops counterbalancing the door. A matched replacement restores the lift so the opener is not overloaded.
Spring trouble, handled the safe way.
Broken Garage Door Spring Replacement in Goodlettsville
A broken spring leaves a garage door heavy, crooked, or stuck shut, and forcing it can make things worse. We replace worn torsion and extension springs, balance the door, and test it before we leave.
Call instead of filling out a form
Call for spring help
Tell us what the door is doing: a loud bang, a gap in the coil, or a door that will not lift. We will talk through the next step and book a visit.
Call (615) 805-0680 →Most repairs typically cost $129-$299. You will hear the price before any work starts.
Open Monday to Friday, 8am to 6pm.
New springs, balanced and tested before we leave.
About this service
How can you tell a garage door spring is broken?
A broken garage door spring is a coiled steel spring that has snapped or lost its tension, so it can no longer counterbalance the weight of the door. The opener then strains, the door feels very heavy by hand, or it will not open at all.
The call often comes after a loud bang from the garage, or on a cold morning when a tired spring finally gives out. Homes across Goodlettsville, TN 37072, on both the Davidson County and Sumner County sides of town, see the same pattern, since humid summers and cold snaps wear metal over time. Goodlettsville Garage Door Rescue serves homes near Long Hollow Pike and the I-65 exits at 97 and 98, including garage door help in Union Hill and repair visits in Madison. A spring problem can also strain the opener, so we check how your opener is coping and look at the lift cables that work with the springs. For a plain-language overview of door parts, see Clopay, a garage door manufacturer.
- ✓ Door feels heavy or will not lift
- ✓ Loud bang, then the door stops moving
- ✓ Visible gap in a coiled spring
- ✓ Door hangs crooked or slams shut
What's included
What is included in a spring replacement visit?
A spring visit is more than swapping one coil. The door has to be balanced, the cables and drums checked, and the opener tested, so the new spring is not fighting the rest of the system. That full check keeps a new spring from wearing out early.
✓
Spring replacement
The broken torsion or extension spring is removed and a new spring matched to your door size and weight is fitted.
✓
Balance and cable check
We check the lift cables, drums, and bottom brackets, since a broken spring can leave cables slack or off their drums.
✓
Opener and safety test
The door is run through full open and close cycles, and the auto-reverse and sensor behaviour is checked.
✓
Old parts taken away
The broken spring and any worn hardware we remove go with us, so your garage is left tidy.
How it works
How does a spring replacement visit work?
Most spring visits follow the same steady sequence, so you know what is happening at each step and when the price is confirmed. The technician starts with the symptoms you describe, then checks the springs, cables, and drums before any tension is released or any part is removed.
01
Look and listen first
We check the springs, cables, drums, and rollers, and ask what you heard or saw when the door failed.
02
Price before work starts
You hear the price for the spring work before anything is removed, so there is no surprise at the end.
03
Release tension safely
Stored spring tension is released with winding bars and the right tools, never by cutting or forcing a spring.
04
Fit and tension the new spring
The replacement spring is wound to the turns your door needs, then the cables are seated on the drums.
05
Balance, test, and tidy up
We check that the door stays put halfway, runs smoothly, and closes safely, then clear up.
Tools & methods
What tools and methods keep a spring job safe?
Springs store a lot of energy, which is why this is not a job for pliers and guesswork. The right tools let a technician control tension instead of fighting it. Each tool has one job, and the balance test at the end proves the result.
Winding bars
Solid bars that fit the winding cone, used to wind and unwind torsion springs a quarter turn at a time.
Locking pliers and clamps
Used to hold the shaft and door in place so nothing moves while tension is released.
Torque and measuring tools
Used to match spring size and turns to the door, rather than fitting whatever is on the truck.
Balance test
The door is stopped halfway by hand. A balanced door stays put instead of drifting up or falling.
Real results
Before and after.
Door stuck after a bang
Before
The door would not budge and the opener strained against a snapped torsion spring.
After
With a matched spring fitted and tensioned, the door lifts evenly and the opener runs without strain.
Door slamming shut
Before
A weak spring let the door drop fast on the way down, which is hard on the opener and the panels.
After
Balanced springs hold the door through its travel, so it closes at a controlled speed.
Crooked, jerky travel
Before
One tired spring pulled harder than the other, so the door twisted and jerked in its tracks.
After
A matched pair evens the pull on both sides, and the door tracks straight again.
Problems we solve
Which spring problems can a replacement fix?
Springs cause most of the heavy, noisy, and stuck-door calls we see in Goodlettsville. Replacing them fixes the cause, not just the noise, and it protects the opener from doing work it was never built to do. That is why the visit checks the whole system, not just the broken coil.
Call (615) 805-0680 →↗
Loud bang or grinding from above the door
That bang is often a spring breaking. We find the break, check the cables it may have slackened, and fit the right spring.
Door closes too fast or hangs unevenly
Uneven spring tension twists the door in its tracks. Replacing springs as a matched set keeps both sides pulling evenly.
Transparent pricing
What does spring replacement usually cost?
Most repairs typically $129-$299
Most spring repairs in Goodlettsville typically cost $129-$299. The final figure depends on whether your door uses torsion or extension springs, whether both springs are replaced, and whether cables or drums also need attention. A door that needs cables or drums as well will be priced with those parts included, before work starts.
You will hear the price before work starts, and the visit also covers the balance and safety tests. If a door has come off its tracks because of a spring failure, that extra work is priced separately and explained first. Amarr, another garage door manufacturer, publishes general door care information that is worth a read while you wait.
01Type of spring
Torsion springs sit above the door on a shaft. Extension springs run along the horizontal tracks. The type and size change the part needed.
02One spring or a pair
On a two-spring door, replacing both at once can even out wear, though it costs more than a single spring.
03Cables and drums
Slack cables or worn drums found during the visit are quoted before any extra work is done.
No surprises
What to expect when you book
When you call, we ask what the door is doing, give you a time window for a visit, and confirm the price before work starts. The technician checks the whole door system, not just the broken part, and shows you the balance test when the job is done.
- ✓ A short call about the symptoms, not a long form
- ✓ Price confirmed before any work starts
- ✓ Balance and safety tests after fitting
- ✓ Old springs and hardware taken away
Before you call
Good to know before you call
Leave a broken-spring door closed
A door with a broken spring can fall fast. Do not prop it open, and do not keep running the opener against it.
Do not try to unwind a spring yourself
Torsion springs hold serious stored energy. Winding bars and a set procedure are what keep this work safe.
A new spring can reveal the next weak link
Worn rollers or frayed cables sometimes show up once the door moves freely again. We point those out and price them separately.
Look for a loud bang followed by a door that will not lift, a door that feels very heavy, or a visible gap in one of the coils above the door. If the door hangs crooked, that can also point to a spring problem. Leave the door closed and call for a look.
No, it is best to leave it closed. Without spring counterbalance, the full weight of the door is on the opener or on your hands, and a door can drop suddenly. Do not disconnect the opener and try to lift it alone.
Torsion springs sit on a shaft above the door and twist as the door moves. Extension springs run along the horizontal tracks and stretch as the door closes. The right replacement depends on your door type, size, and weight.
Most spring repairs typically cost $129-$299. The exact price depends on the spring type, whether one spring or a pair is fitted, and whether cables or drums need work. You will hear the price before any work starts.
Most spring replacements take about one to two hours once the technician is on site, including the balance and safety tests. Doors with extra cable or track work can take a little longer.
Ready when you are
Door stuck because of a broken spring?
Do not force it. Call and tell us what you heard and what the door is doing now. Most repairs typically cost $129-$299, with the price confirmed before work starts.
Call for spring help (615) 805-0680 →
Call to book
Get in touch with us
If your door will not lift, feels heavy, or banged and then stopped, call us during office hours and describe what happened. We serve Goodlettsville and the nearby areas from our shop at 2208 Ted Dorris Rd, Goodlettsville, TN 37072.
Call anytime during office hours(615) 805-0680Email the officeinfo@goodlettsville.garagedoorrescue.us
Office hoursMon-Fri, 8am-6pm
One call books the visit
Call to book your visit
Tell us what the door is doing: a loud bang, a gap in the coil, or a door that will not lift. We will talk through the next step and book a visit.
Call (615) 805-0680 →Most repairs typically cost $129-$299. You will hear the price before any work starts.